Home
Up
Profile
Products
Documents
International
Reps
Contact
Location
Feedback

All information contained within these pages Copyright©2001, ©2009 Vale Industries Inc. and is subject to change without notice.

Best viewed 800 x 600 with IE 5.0

Last Modified  04/23/09 11:27 PM

 

 

 

 

 

 

 

INDUSTRIAL POWER UNITS

Economical Industrial Grade 10,000 PSI Power Units

Many applications  do not require the continuous duty Mill quality of our standard 10,000 PSI Hydraulic Power Units. For these applications Vale Industries is proud to present our newest addition to our product line. The Industrial Series of power units. Instead of the usual continuous run power unit, the pump is an 'on demand' unit, that starts when the trigger actuator is pulled, and ceases operation when released. Correspondingly the motor is running only when the tool is in operation and is idle otherwise.

Please 'click' on a picture to enlarge.

Lightweight Portable Power Unit

The compact Vale Industries VHPI-3 power unit weighs only 30 pounds with oil and can be easily carried from one operation to another utilizing the provided handle. The pump provides 1 G.P.M flow at low pressure ( below 100 PSI), for a fast approach. The flow is then automatically shifted to a lower setting to provide higher pressures (up to 10,000 PSI) for cutting. An integral dump valve is provided to unload the system when the actuating trigger is released.

The motor is fully capable of starting under load and requires only 10.2 Amps, which permits operation with small generators or low amperage circuits.

Noise level of the pump is in the 85 to 90 dBA range and is intended for intermittent duty.

This Power Unit is IDEALLY suited to Vale Industries range of Lightweight Barshears and Rod Straighteners.

Model

Part No.

Motor H.P.

Reservoir

Pump G.P.M.

Supply Voltage

Length Width Height

Control Voltage

VHPI-3

A-5534

1/2

1/2 Gal.

1/0.8

115 VAC 50/60 HZ

6" 8" 16"

115 VAC

To download a 10,000 PSI Power Unit Specification Sheet "Click Here"